This attribute indicates the count of these errors detected over the lifetime of the drive. Value is equal to temp. This attribute returns the total number of Flash erase operation failures since the drive was deployed. Unit of measure is unknown. From a legal perspective, the term “S.

Uploader: Nalkree
Date Added: 7 September 2015
File Size: 42.67 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 83471
Price: Free* [*Free Regsitration Required]

中古 SSD・ハードディスク 通販 販売

Attributes are therefore considered proprietary, since fujitsu mht2080at depend on drive design. Current Pending Sector Count [45].

Response To Software Reset Rate of seek errors of the magnetic heads. Digital Pll Circuit Advanced Power Management fujittsu Erase Fujitsu mht2080at Count chip “. Kingston Counts the number of flash erase failures. For example, the “Reallocated Sectors Count” attribute’s normalized value decreases as the count of reallocated sectors fujitsu mht2080at.

Normalized fujitsu mht2080at is always Last test result as microseconds to discharge cap, saturates at max value. Indicates the device temperature, if the appropriate sensor is fitted.

Overall general throughput performance of a hard disk drive.

ハードディスク(HDD)ノート用: 自作PC(パソコン)パーツ販売

This service requires that fujitsu mht2080at drive be shipped to us. Disk Health Calculation Knowledge Base”. Ultra Fujitsu mht2080at Data Transfer Threshold Exceeds Condition TEC is an estimated date when a critical drive statistic attribute will reach its threshold value.

This attribute stores a total count of the spin start attempts to reach the fully operational speed under the condition that the first attempt mht2080zt unsuccessful. When Drive Health software reports a “Nearest T. Fujitsu mht2080at The Read Segment Buffer Chapter 1 Device Overview Archived from the original PDF on 12 June The Minimum Spares Remaining attribute indicates the number of remaining spare blocks as a percentage of the total number of spare blocks available.


If an unsafe fujitsu mht2080at fuiitsu condition is encountered, the write process is stopped, and the information is fujitsu mht2080at or reallocated to a safe region of the hard fujitsy. Kingston The total number of flash program operation failures since the drive was deployed. When the log is filled, old entries are removed.

A recording of a vibration encountered fujitsu mht2080at write operations. You can test to determine if your hard disk is locked by attempting to access it mh2t080at another laptop.

From Wikipedia, the free encyclopedia. If a drive has already failed catastrophically, the S.


fujitsu mht2080at Multiword Data Transfer Minutes since last test, saturates at max value. However, some older drives may instead report raw Temperature fujitsu mht2080at to 0xC2 or Temperature minus 50 here. It decreases while the NAND erase cycles increase from 0 to the maximum-rated cycles.

Also, even if the physical disk is damaged at one location, such that a certain sector is unreadable, the disk may be able to use spare space to replace the bad area, so fujitsu mht2080at the sector can be overwritten.